Home > Preamps & Pickups > Bartolini
Choose a sub category:
BAE
Sort By:
Page of 1
Bartolini MM4CBC Classic Bass Series Pickup for Music Man - "Classic Bass" CB series bass pickups feature an extended and more resonant frequency range. They have far more "air" and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics. CNC machined blades on all of the 4 string bass pickups listed below allow them to cover string widths from 50mm to 59mm on medium curvature fingerboards with excellent string balance. 4 Conductor. FREE SHIPPING! The M34CBC-B is an M3 Soapbar shaped bass pickup for the neck position. It is 3.50″ / 88.90mm long and 1.50″ / 38.10mm wide. The dual coil design features powerful lows and low-mids – bright treble.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The M34CBC-T is an M3 Soapbar shaped bass pickup for the bridge position. It is 3.50″ / 88.90mm long and 1.50″ / 38.10mm wide. The dual coil design features powerful lows and low-mids – bright treble.
The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Product Description
The MK4CBC-B is an MK Soapbar shaped bass pickup for the neck position. It is 4.24″ / 107.57mm long and 1.33″ / 33.66mm wide. The dual coil design features powerful lows and low-mids – bright treble.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Product Description
The MK4CBC-T is an MK Soapbar shaped bass pickup for the bridge position. It is 4.24″ / 107.57mm long and 1.33″ / 33.66mm wide. The dual coil design features powerful lows and low-mids – bright treble.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The 9CBJD L3/S3 is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its bright tone,  enhanced treble tone. They feature a dual in-line humcanceling coil design.
The “Classic Bass”  series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original  J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use  two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
The M45CBC-T is an M4 Soapbar shaped bass pickup for the bridge position. It is 4.00″ / 101.60mm long and 1.50″ / 38.10mm wide. The dual coil design features powerful lows and low-mids – bright treble.
The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The 8CBP is the Fender Precision Bass® (P Bass® ) replacement pickup. They are highly respected by musicians and luthiers alike for their classic tone with more lows and low-mids.

The two pickups in the P-Bass pair overlap each other by 3/4″ (19mm).

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Product Description
The DL5CBC is the Music Man® style bass replacement pickup. It fits most 5-string Music Man StingRay basses after 1992 (Note: this pickup has three separate mounting ears) and it fits some Lakland and Tobis basses. The dual coil design features powerful lows, low-mids, and a bright treble. The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Bartolini 8S P Bass Pickup
Our Price: $122.00
The 8S is the Fender Precision Bass® (P Bass® ) replacement pickup. They are highly respected by musicians and luthiers alike for their deep tone. The two pickups in the P-Bass pair overlap each other by 3/4″ (19mm). The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics. The 72M45C-B is an M4 Soapbar shaped bass pickup for the neck position. It is 4.00″ / 101.60mm long and 1.50″ / 38.10mm wide. The dual coil design features deep tone.
The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
The 72M45C-B is an M4 Soapbar shaped bass pickup for the neck position. It is 4.00″ / 101.60mm long and 1.50″ / 38.10mm wide. The dual coil design features deep tone.
The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
Product Description
The MMC is the Music Man® StingRay(R) bass replacement pickup. The dual coil design offers deep tone.

The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
The 9CBJD L1/S1 is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line humcanceling coil design.
The “Classic Bass”  series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original  J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use  two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
The 9CBJD L1/S1 is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line humcanceling coil design.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.

The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
Bartolini 59CBJD L1/N1
Our Price: $147.00
The 59CBJD-L1 is the Fender Jazz Bass® ( J Bass® ) replacement ‘long’ pickup for the bridge position. It is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line humcanceling coil design.
The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
Bartolini 57CBJD L1/S1 pickup pair replacement for Jazz 5 strings. "Classic Bass" CB series bass pickups feature an extended and more resonant frequency range. They have far more "air" and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics. Dual in-line humcancelling, with deep tone. FREE SHIPPING! The 9SU L/S is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deepest tone out of the J Bass pickup family. They feature a single coil design.
The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
The 9J1 L/S is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line coil design. The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics. The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use two ‘long’ bridge-length pickups. In this configuration, it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly. The 57J1 L/S is the Fender American Standard Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a Dual-Inline hum-cancelling coil design.
The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
The 59J1 L/S is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line hum-canceling design.
The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.