Home > Basses > MTD
Sort By:
Page of 1
The new Kingston Z features a carved mahogany body, maple burl top and matching peg head veneer; wood shells on active soap bar style pickups; a rock maple neck with a rosewood fingerboard; 3 band active electronics.  Features Include: 34" scale, 24 medium jumbo frets, Rosewood, Zero fret, MTD quick release bridge, 3/4" (19mm) spacing 4 and 5 string, One-piece neck w/satin polyester finish, Carved mahogany body with maple burl top, Controls are volume, blend, treble, midrange, bass, MTD active wood covered soap bar pickups, Shielded electronics compartment, Pewter Hardware Michael Tobias and legendary bassist Andrew Gouche worked together to create the MTD Kingston AG, an amazing bass with many custom features that were personally selected by Andrew himself. This bass is fully loaded with a 35" scale, alder body with maple burl top and one-piece neck, MTD quick release bridge and Bartolini pickups and active Bartolini 3-band preamp. With its smooth playability and mind-altering tones, this bass will change the way you think about the instrument. Available in a custom finish created to perfectly blend with the fingerboard.

In Michael Tobias's own words, "This is a sweet sounding bass."

FEATURES
  • 35" scale
  • 24 medium jumbo frets
  • One-piece neck with satin polyester finish
  • Alder body with Maple Burl top
  • MTD quick release bridge, 3/4" (19mm) spacing
  • Double-action truss rod
  • Purpleheart fingerboard
  • Five controls:volume (with push/pull preamp bypass), blend, treble
  • control, mid control (with push/pull mid shift: 250Hz - 800Hz.) and bass control
  • Bartolini pickups and active Bartolini 3-band preamp
  • Shielded electronics compartment
  • Buzz Feiten Tuning System
MTD US CRB PROTOTYPE! Circa 2011? This is truly a unique piece from the mind behind so many modern bass designs and innovations. To our knowledge, only 3 or 4 of these exist. Michael Tobias built these as design prototypes for the Kingston CRB's available today. As you can tell from the pictures, this bass is very different from what became of the production Kingston CRB. The CRB was Michael Tobias' interpretation of the Precision bass design. This PJ is the ONLY MTD US that I have personally seen with the PJ pickup configuration.
This bass is pristine, and very lightweight. Only the slightest shine around the controls, and a small pencil tip ding on the top and near the upper horn (impossible to photograph) betray this as preowned. Frets are very clean and free of wear.
Lite Ash body
Rosewood Fretboard
Maple Neck
34" Scale
1 3/4" nut
Zero Fret
Bartolini PJ Pickups
Signature Tobias Asymmetrical Neck Curve
8.1 lbs!
MTD CRB Fretless
Our Price: $2,999.00
MTD 534 Myrtle Burl SN 2888
Our Price: $5,099.00
Beautiful pre-owned fretless bass from MTD. Great condition with Bartolini P/J pickups.
MTD US 534-24 Myrtle Burl, Tulipwood Body, Solid Wenge Neck and Fingerboard, 35" Scale, 2 Octave Frets, 19 mm spacing, Matching Peghead & Truss Cover, Buzz Fietin Tuning System, MTD Custom Fitted Hardshell case.  Bartolini Pickups, and an Active Bartolini 3 band preamp w. 3 way Mid Switch.  FREE SHIPPING! MTD 534 Makore/Maple
34" Scale
Florida Rosewood Fingeboard
2 Octave 24 Fret Neck
Myrtle Burl 10 Top
Matching Peghead Veneer
Matching Truss Rod Cover
Buzz Feitin Tuning System
MTD Custom Fitted Case
MTD US 535-24 Myrtle Burl, Makore Body with matching wood knobs, Maple Neck, Florida Rosewood Fingerboard, MTD World Logo, 35" Scale, 2 Octave Frets, 19 mm spacing, Matching Peghead & Truss Cover, Buzz Feitin Tuning System, MTD Custom Fitted Hardshell case.  Bartolini Pickups, and an Active Bartolini 3 band preamp w. 3 way Mid Switch.  FREE SHIPPING! MTD 535 with rare Resin Impregnated Spalt Maple top and toasted Lightweight Ash body, Ash neck, Birdseye Maple Double Octave fingerboard, matching peghead with World MTD Logo, matching truss cover, Bartolini Pickups, and an Active 3 band preamp w. 3 way Mid Switch. Matching Wood Knobs.  Includes an MTD Fitted Hardshell case.  FREE SHIPPING!