Home > Pedals > Source Audio
Sort By:
Page of 1

The Source Audio Dual Expression Pedal delivers precision response and smooth action in a durable cast aluminum housing. Dual TRS expression outputs make it possible to control two effects units simultaneously. The pedal is compatible with any model or brand of effect that features a TRS expression input. The Range Adjust Knob sets the bottom point of the expression range. Plus, a special Sensor Output connects directly to any Hot Hand®, Soundblox®, Soundblox 2, or Soundblox Pro pedal for real-time control over filter sweeps, effect modulation, LFO speeds, wet/dry mixes, drive levels and more.

DUAL EXPRESSION PEDAL FEATURES & SPECIFICATIONS

· Two Isolated TRS Expression Outputs – simultaneous control over multiple effect pedals or rack systems.

· Sensor Output — 1/8-inch; four conductor output compatible with all Soundblox, Soundblox 2, or Soundblox Pro pedals.

· Range Adjust Knob — Adjusts the range of expression signal sent through the outputs.

· OUTPUT 1: sends expression signal out via either ¼ inch TRS cable or 4 conductor Soundblox compatible 1/8 inch sensor cable.

· OUTPUT 2: sends expression signal out via ¼ inch TRS cable.

· Rugged, cast aluminum housing.

· Includes one ¼-inch TRS connector cable and one 1/8 inch four conductor Sensor Output cable

· Dimensions: 10 in/25.4cm (Length) x 4 in/10.2cm (width) x 3 in/7.6cm (height)

The Soundblox Multiwave Bass Distortion features the same multi-band process that made the original Multiwave guitar pedal so popular, but this time, the Source Audio engineers adapted the process to compliment the unique frequency range of the bass guitar. Multi-band processing divides a signal into multiple bands then distorts them individually, giving musicians unprecedented levels of sound clarity and note articulation. Bassists can effectively combine complex chords and intervals with distorted tones—the Multiwave eliminates the mush and allows each note to ring clear and true.

Users have access to 23 distinct and modern sounding distortions that go far beyond traditional sounds. They range from “normal”, for a somewhat traditional distortion curve, to extreme “foldback” and “octave” settings for more aggressive and synth-like tones. Each distortion type is further customizable via the drive control, and separate clean and distorted level knobs. This advanced sound control alleviates the tendency for low-end reduction associated with most bass distortion units.

The Multiwave Bass is also compatible with the Hot Hand® motion controller, adding even more expressive possibilities.

SOUNDBLOX MULTIWAVE BASS DISTORTION FEATURES & SPECIFICATIONS
Diverse sound palette — featuring 21 varieties of our distortion algorithm.
Multiband processing — signal is split into multiple bands and distorted individually for unprecedented sound clarity.
Modern design — A thoughtfully designed box which features rugged construction and sleek looks.
State-of-the-art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.
Motion Control — all Soundblox pedals are ‘Hot Hand Ready’ and can be used with any Hot Hand motion sensor to extend the capabilities of the unit.
Active Analog Bypass — bypass is fully routed around the DSP and active input ensures zero signal degradation.
Dimensions: 7 in./17.8cm (length not including I/O jacks) x 4 in./10.2cm (width) x 2 in./5cm (height, including knobs).
The Source Audio Programmable EQ is a thoroughly modern and highly streamlined upgrade to traditional equalizer pedals. This compact, rugged, cast aluminum stompbox provides quick, hands-free access to four different user programmed EQ settings. Whatever your instrument, playing style, or genre, the Source Audio Programmable EQ is the essential tone-sculpting tool for your live rig.

The Programmable EQ packs plus or minus 18dB of range over seven frequency bands, plus an additional frequency band at 62Hz, accessible via the Octave Extend function. Engaging the Octave Extend systematically optimizes the pedal’s frequency spectrum to accommodate the specific frequency range of the bass. Once you’ve dialed in the desired guitar or bass tone, save it in one of four programmable user presets. Each preset is easily accessible via the hands-free footswitch scrolling function. Simply hold down the footswitch and let the pedal scroll through each preset at an adjustable rate – release to engage. The pedal’s MIDI input also provides remote access to user presets or engages/disengages the effect. Run a MIDI signal from your POD, Eventide Space reverb, TC Nova System or any other MIDI compatible multi-effects unit and vastly expand your tone horizon within each preset.

The Programmable EQ offers a substantial clean boost of up to 12dB. Use the clean boost for an entirely transparent volume increase or go further and give your amp the front-end push needed for an aggressive natural break-up. The relay-based true bypass footswitch provides improved reliability, remote switching capabilities, and a completely unaffected, hard wire signal in bypass mode. As a bonus, the Auto-scrolling function, which automatically scrolls between all four presets at an adjustable rate, creates unique and dramatic effects similar to sequencer or tremolo units.

PROGRAMMABLE EQ FEATURES & SPECIFICATIONS
+/- 18dB range over seven frequency bands.
Four independent programmable user presets easily recalled via the Footswitch.
Octave Extend Function: optimizes the EQ for bass with an additional freq band at 62Hz.
Small Footprint: A compact, rugged, cast aluminum housing.
12dB of clean boost.
Auto-scrolling function: automatically scrolls through all four presets to create unique and dramatic effects similar to sequencer or tremolo units.
Hardwire “True” Bypass: utilizes a small-signal relay for improved reliability and remote switching capabilities.
MIDI input: recall presets, engage/bypass remotely via MIDI.
State-of-the-art DSP — our proprietary 56-bit Digital Signal Processor, the SA601 and crystal-clear 24-bit converters.
Dimensions: 4.5 in/11.4cm (Length) x 2.5 in/6.4cm (width) x 2 in/5.1cm (height)
Runs on a 9V battery (included) or power supply (not included).
The Soundblox 2 Multiwave Bass Distortion includes all the low-end retaining distortion and fuzz tones of the original Soundblox Multiwave Bass Distortion, repackaged in a compact, cast-aluminum housing. The pedal features 23 traditional and non-traditional synth-like effects plus a Clean Boost mode, two user presets, three-band tone control, separate Clean and Distortion Mix knobs, Universal Bypass™ (selectable buffered or true bypass), a three-level noise gate, and a Multi-function input compatible with Hot Hand®, the Source Audio Dual Expression Pedal, or MIDI*. Use the Hot Hand Motion Sensor Ring or the Source Audio Dual Expression Pedal for on-the-fly control over any of the six adjustable parameters or to seamlessly morph from one user preset to the other. Plug in a MIDI controller for external access to presets and parameters.

The Soundblox 2 Multiwave Bass Distortion features both multi band and single band processing. Multi band processing splits the input signal into ten distinct frequencies bands, distorts each one separately then recombines them for the final output signal. The effect is a crisp distortion with superior low-end preservation and note articulation. Single band processing employs a more conventional approach, applying a single distortion element to the entire signal. The processing categories are further broken down into three subcategories: “Normal”, for a more traditional distortion curve, “Foldback”, for an aggressive, synth-like fuzz and “Octave”, for unique octave-up distortion effects.

SOUNDBLOX 2 MULTIWAVE BASS DISTORTION SPECIFICATIONS
Diverse Sound Palette — Featuring 23 varieties of our unique distortion algorithms with an additional CLEAN BOOST mode.
Multiband Processing — Signal is split into multiple bands and distorted individually for unprecedented sound clarity.
Compact, cast aluminum housing.
2 User Presets easily recalled via two footswitches.
Universal Bypass — selectable buffered or true bypass.
3-band tone control — select between “treble”, “mid”, and “bass” for precision tone sculpting.
Noise Gate — easily activated 3-level noise gate.
Multi-function In — use an expression pedal or the Hot Hand Motion Sensor to morph between presets or manipulate any of the six assignable parameters.
MIDI Capable — the Multi-function In jack also allows MIDI access to presets and parameters.
State-of-the-art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.
9V DC power supply included
The Soundblox 2 Dimension Reverb offers 12 distinct shades of reverb. Choose from 6 reflectively diverse room sounds, two plate and two spring reverbs, modulation reverb, and echo. The assignable “Option” knob makes it possible to adjust 9 different parameters: wet/dry mix, time (i.e. resonance), bass, treble, pre-delay, diffusion, output level, modulation rate, and modulation depth.

The Soundblox 2 Dimension Reverb features a compact, durable cast aluminum housing, 2 user presets, and Multi-function in and out jacks compatible with Hot Hand®, the Source Audio Dual Expression Pedal, or MIDI*. Use the Hot Hand Motion Sensor or the expression pedal for on-the-fly control over any of the 9 adjustable parameters, or plug in a MIDI controller for external access to presets and parameters.

SOUNDBLOX 2 DIMENSION REVERB FEATURES & SPECIFICATIONS
Diverse Sound Palette — Featuring 6 different room sounds, 2 plate reverbs, 2 spring reverbs, modulation reverb, and echo.
Compact, cast aluminum housing.
2 User Presets easily recalled via two footswitches.
Universal Bypass — selectable buffered or true bypass.
9 Adjustable Parameters — adjust the wet/dry mix, time (i.e. resonance), treble, bass, pre-delay, diffusion, output level, modulation rate, and modulation depth.
Multi-function In — use the Source Audio Dual Expression Pedal or the Hot Hand Motion Sensor for on-the-fly control over any of the 9 adjustable parameters.
MIDI Capable — the Multi-function In jack also allows MIDI access to presets and parameters.
State-of-the-art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.
9V DC power supply included
Dimensions: L: 4.5 in./11.4cm x W: 4.5 in./11.4cm x H: 2.25 in./5.7cm (including knobs)

The Soundblox 2 Manta Bass Filter is the next generation of the popular Soundblox Pro Bass Envelope Filter. The Manta features 12 finely crafted filter effects plus eight variations of distortion, a feature not seen before in the Soundblox line of filter effects. These Distortion Types are not just crunch, or amp simulation; they are specifically designed to work in tandem with the filter effect selections. The pedal’s filters are controllable by its 2 envelope followers, or sine, square, and saw tooth LFO. Plus, like all Soundblox 2 pedals, the Manta is compatible with the Source Audio Dual Expression Pedal, the Hot Hand 3 Wireless Effects Controller, or MIDI control signals via the Soundblox HUB.

The Manta features a very unique signal path, internally splitting the instrument’s dry and distorted signals. The dry signal alone controls the envelope, increasing the playing response from the filter. The pedal’s 12 filter effects include 2 and 4-pole Low-Pass, Single-Peak, Multi-Peak, and Phasers. The Distortion Types include Hard and Soft clip, Octave distortion, Fold-back, Quantized, and synth-like Gated Fuzz. Each distortion has independent gain levels adjusted by the Drive control.

SOUNDBLOX 2 MANTA BASS FILTER FEATURES & SPECIFICATIONS

· Diverse Sound Palette — Features up to 24 different Low Pass, High Pass, Band Pass, Single Peak, Multi-Peak, and Notch filters.

· Deep Control Set — Access to control parameters typically found in only professional rack-mount effects, or computer software.

· Drive/Distortion Type — Add a variety of gain and distortions to any of the Manta’s effects for an added boost and flavor.

· State-of-the-Art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.

· Multi-Function Jacks — Use the Source Audio Hot Hand motion sensors, or Dual Expression Pedal, for on-the-fly control over modulation or any adjustable parameter.

· MIDI Capable — Use the Soundblox HUB (connected to the Multi-Function Input) to allow MIDI access to controlling parameters, and save up to 128 user presets.

· Universal Bypass — Select either analog buffered or relay based True Bypass.

· Compact, rugged, cast aluminum housing.

· 9V DC power supply included

· Dimensions: L: 4.5in/11.4cm x W: 4.5in/11.4cm x H: 2.25in/5.7cm (including knobs)

The Soundblox Multiwave Bass Distortion Pro inherits the power and clarity of the original Soundblox Multiwave Distortion and adapts it to the unique frequency range of the bass guitar. Bassists can effectively combine complex chords and intervals with distorted tones — multi band processing eliminates the mush and allows each note to ring clear and true. The pedal also features single band processing for more traditional distortion sounds. It’s the perfect pedal for both the studio and stage.

Users have access to 23 modern and distinctive distortions and an additional clean boost/EQ mode. Distortion curve types range from “normal” overdrive for traditional sounds to “foldback” and “octave” for more aggressive synth-like tones. Each distortion type is further customizable via the 7-band equalizer, drive control, and separate mix knobs for clean and distorted signals. This advanced sound control alleviates the tendency for low-end reduction associated with most bass effects.

Six user presets, accessible via three footswitches, assist in the speedy recall of any custom tailored sound, and a traditional expression pedal input facilitates the seamless morphing from one user preset to another. A MIDI input allows external access to presets and parameters, and, as with all Soundblox products, it is compatible with the Hot Hand ring controller.
SOUNDBLOX PRO MULTIWAVE BASS DISTORTION FEATURES & SPECIFICATIONS
Diverse Sound Palette — Featuring 23 varieties of our unique distortion algorithms with an added CLEAN BOOST + EQ mode.
Multiband Processing — Signal is split into multiple bands and distorted individually for unprecedented sound clarity.
State-of-the-art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.
6 User Presets — Easy to configure user presets in two banks selectable via 3 footswitches for quick access of your favorite sounds.
7-Band Equalizer — Ultra-precise 7-band equalizer for in-depth tone control saved per preset.
Extended Control — An expression input allows morphing of sounds between preset banks. A MIDI input allows external access to presets and parameters.
Motion Control — All Soundblox and Soundblox Pro pedals are ‘Hot Hand Ready’ and can be used with any Hot Hand motion sensor to extend the capabilities of the unit.
Active Analog Bypass — Bypass is fully routed around the DSP and active input ensures zero signal degradation.
9V DC power supply included.
Dimensions: 7 in./17.8cm (length not including I/O jacks) x 6 in./15.25cm (width) x 2 in./5cm (height, including knobs).
The Soundblox Pro Bass Envelope Filter is an evolution of its hugely popular predecessor, the standard Soundblox BEF. As before, there are 22 different envelope filter effects to choose from including 2 Pole and 4 Pole Low Pass variations, Single Peak, Triple Peak, Peak/Notch variations, as well as Phaser settings. Each of these settings can be further modified with a variety of control options including positive/negative filter sweeps, sweep range, attack and decay speed settings, or frequency range selection.

In this Pro version, users are able to choose from four different modulation sources including standard envelope filter sweeps, selectable LFO wave forms, a passive expression pedal and the Hot Hand motion sensing ring. An expression pedal input can be used to control filter modulation like in a standard wah pedal or a wide variety of parameters including sweep range, effect selection, LFO speed and more. As in our other Pro Series pedals, the BEF Pro features three footswitches to hold six customizable presets but also includes an option for Tap Tempo LFO on one of the footswitches.

SOUNDBLOX PRO BASS ENVELOPE FILTER FEATURES & SPECIFICATIONS
22 Filter Sounds including 2 Pole Low Pass, 4 Pole Low Pass, Single Peak, Triple Peak, Peak & Notch, and Phasers.
Positive and Negative filter sweep with variable range and sensitivity.
Wet/Dry Mix knob featuring our signature low-end preserving algorithm ‘Lo-Retain™’.
4 modulation sources including envelope, LFO, expression pedal and Hot Hand.
Tap tempo speed control for LFO.
State-of-the-art DSP — Our proprietary 56-bit Digitial Signal Processor, the SA601, and crystal clear 24-bit converters.
6 user presets — Easy to configure user presets in two banks selectable via 3 footswitches for quick access of your favorite sounds.
7-Band Equalizer — Ultra precise 7-band equalizer for in-depth tone control saved per preset.
Extended Control — An expression input allows for control of a wide variety of pedal parameters. A MIDI input also allows external access to presets and parameters.
Motion Control — All Soundblox and Soundblox Pro pedals are ‘Hot Hand Ready®’ and can be used with any Hot Hand motion sensor to extend the capabilities of the unit.
Active Analog Bypass — Bypass is fully routed around the DSP and active input ensure zero signal degradation.
9V DC power supply included.
Dimensions: 7 in./17.8 cm (length not including I/O jacks) x 6 in./15.25 cm (width) x 2 in./5 cm (height, including knobs).