The Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 3-band active EQ, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag.
WARNING: The Vintage Deluxe has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.
Darkglass Electronics Vintage Deluxe Preamp Features:
Level: Sets the volume of the overdriven signal.
Drive: Sets the amount of saturation in the overdriven signal.
Blend: Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
Era: Interacts with the Drive knob to shape the character of the pedal. Dial it down to get the warm midrange tones of the 70s or crank it up to get the punchy metallic tones of 80s and 90s rock.
Bass: +-12dB @ 100Hz Mid: +-12dB @ 1kHz Treble: +-12dB @ 5kH
Direct Output: A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles. The Direct Output also includes a ground lift switch – this should be pushed in (grounded) in most scenarios.
Parallel Output: A passthrough for your input signal, useful for parallel processing.