Home > Preamps & Pickups
Sort By:
Page of 3
Aguilar Amplification Universal Power Supply for Aguilar Effects Pedals.

This universal power supply accepts 100-240 volts and include 4 different AC adapter plates to work with any countries AC outlet.
9 -volt version.


FREE SHIPPING!
Aguilar Amplification Universal Power Supply for Aguilar Effects Pedals.

This universal power supplie accepts 100-240 volts and include 4 different AC adapter plates to work with any countries AC outlets.

18-volt version.


FREE SHIPPING!
Nordstrand NM4 Mustang Bass Replacement Pickups. Uses Existing Pickup Covers, none supplied.  FREE SHIPPING!
Bartolini MM4CBC Classic Bass Series Pickup for Music Man - "Classic Bass" CB series bass pickups feature an extended and more resonant frequency range. They have far more "air" and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics. CNC machined blades on all of the 4 string bass pickups listed below allow them to cover string widths from 50mm to 59mm on medium curvature fingerboards with excellent string balance. 4 Conductor. FREE SHIPPING! The M34CBC-B is an M3 Soapbar shaped bass pickup for the neck position. It is 3.50″ / 88.90mm long and 1.50″ / 38.10mm wide. The dual coil design features powerful lows and low-mids – bright treble.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The M34CBC-T is an M3 Soapbar shaped bass pickup for the bridge position. It is 3.50″ / 88.90mm long and 1.50″ / 38.10mm wide. The dual coil design features powerful lows and low-mids – bright treble.
The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Product Description
The MK4CBC-B is an MK Soapbar shaped bass pickup for the neck position. It is 4.24″ / 107.57mm long and 1.33″ / 33.66mm wide. The dual coil design features powerful lows and low-mids – bright treble.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Product Description
The MK4CBC-T is an MK Soapbar shaped bass pickup for the bridge position. It is 4.24″ / 107.57mm long and 1.33″ / 33.66mm wide. The dual coil design features powerful lows and low-mids – bright treble.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The Fender Precision® bass provided the big, round tone found in almost every hit song from the 60's.

Sitting deep in the track and providing the forward motion in almost every hit song from the 60's is the big, round tone of the classic Fender Precision® bass. To create a pickup with that much vibe and feel, we studied the pickups from Aguilar's Dave Boonshoft's personal 1963 and 64 Precision basses.

The AG 4P-60 pickups use all the period correct parts, including Heavy Formvar wire and Alnico V magnets. These pickups have just the right amount of mid-range "nose" to cut through a loud rock band and give all the deep support one would expect from a great 60's P-bass pickup.

The AG 4P-60 are direct replacements for Precision Bass® style basses.
The 9CBJD L3/S3 is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its bright tone,  enhanced treble tone. They feature a dual in-line humcanceling coil design.
The “Classic Bass”  series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original  J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use  two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
The M45CBC-T is an M4 Soapbar shaped bass pickup for the bridge position. It is 4.00″ / 101.60mm long and 1.50″ / 38.10mm wide. The dual coil design features powerful lows and low-mids – bright treble.
The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The 8CBP is the Fender Precision Bass® (P Bass® ) replacement pickup. They are highly respected by musicians and luthiers alike for their classic tone with more lows and low-mids.

The two pickups in the P-Bass pair overlap each other by 3/4″ (19mm).

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
This pickup is an accurate reproduction of an early pre-Ernie Ball® Music Man® pickup. It uses the same wire, Alnico V magnets, and has the same DC resistance. As a result, it sounds just like the early Music Man® basses that are so widely coveted. Includes black cover (exposed pole pieces). FREE SHIPPING! Product Description
The DL5CBC is the Music Man® style bass replacement pickup. It fits most 5-string Music Man StingRay basses after 1992 (Note: this pickup has three separate mounting ears) and it fits some Lakland and Tobis basses. The dual coil design features powerful lows, low-mids, and a bright treble. The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
Aguilar OBP-1 two band active bass preamp. The OBP-1's boost-only design gives you the tone-shaping benefits of active electronics without losing the inherent sound of the instrument. Discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment high in dynamic headroom and low in noise. Includes separate bass and treble pots and detailed instructions - uses existing volume pot. 9 or 18 volt operation is standard (two 9v batteries). Gain an extra 3.5db with 27 volts. Measures 1.35" x 0.50" x 2.2". Made in the USA. Ten year manufacturer's warranty.  FREE SHIPPING!
Aguilar OBP-2TK Preamp
Our Price: $119.00
The OBP-2 was designed to give bassists fat tone while being small enought fit into tight control cavities.  Wire this preamp with one 9 volt battery and it will fit into just about any instrument.  With +/-18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can emphasize just the right frequencies to make your bass sound great in any mix.  Specs Bass control: plus/minus 18 dB @ 40 Hz.  Treble control: plus/minus 16 dB @ 6.5 KHz.  Input impedance: 1 meg ohm  Output impedance: 100 ohm 9 or 18 volts operation. Additional 6dB with 18 volts.%0a%0aDistortion: .019 into 10k ohm load Noise: -95 dBm unweighted.  Battery life: 324 hours  Wire lead length: 6.50 inches A five string reproduction of the best sounding Music Man pickup with Alnico V magnets for a true fat warm sound.  Fits Music Man  FREE SHIPPING!

A 5 string version of the otherwise identical MM4.2, itself an accurate reproduction of an early pre-Ernie Ball® pickup. It features Alnico V magnets and heavy Formvar wire for an authentic punchy, growly, and inherently fat tone. The MM5.2 is a dual coil pickup that can be wired series, parallel, or single coil (split-able). Includes black cover (exposed pole pieces).

The industry never really adapted a standard for this style of pickup, and as a result there are at least 3 different spacing and cover combinations. This version has a larger shape with ears and wide spacing to fit Lakland® and other basses with wider spacing. FREE SHIPPING!

Bartolini 8S P Bass Pickup
Our Price: $122.00
The 8S is the Fender Precision Bass® (P Bass® ) replacement pickup. They are highly respected by musicians and luthiers alike for their deep tone. The two pickups in the P-Bass pair overlap each other by 3/4″ (19mm). The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics. A faithful reproduction of one of the most famous pickups in the world. It will give a very big and full tone with the slightly hollow grind that the original's are known for.  FREE SHIPPING! This is a vintage correct version of a classic pickup. It will give a slightly smoother tone than the standard NP4.  FREE SHIPPING!
The 72M45C-B is an M4 Soapbar shaped bass pickup for the neck position. It is 4.00″ / 101.60mm long and 1.50″ / 38.10mm wide. The dual coil design features deep tone.
The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
The 72M45C-B is an M4 Soapbar shaped bass pickup for the neck position. It is 4.00″ / 101.60mm long and 1.50″ / 38.10mm wide. The dual coil design features deep tone.
The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
A faithful reproduction of one of the most famous pickups in the world. It will give a very big and full tone with the slightly hollow grind that the original's are known for.  FREE SHIPPING!
This is a quad coil version of the famous Music Man style pickup.  It has the ability to have either the front or the rear coil soloed and still maintain silent operation.  It can also be wired parallel or series depending on your taste.  In any configuration, it is a great organic sounding pickup, with lots of bottom, a growly midrange, and nice clean pleasant highs.  FREE SHIPPING! Product Description
The MMC is the Music Man® StingRay(R) bass replacement pickup. The dual coil design offers deep tone.

The “original series” bass pickups with passive designs. They are cast in epoxy to remove unwanted feedback and microphonics.
Aguilar OBP-3SK three-band active bass preamp. The OBP-3 is Aguilar's most flexible onboard preamp design, providing  /-18dB of cut and boost at 40Hz,  /- 16dB of cut and boost at either 400Hz or 800Hz and  /- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a mini-toggle or internal dip-switch for midrange frequency selection. The "SK" version includes a stacked bass/treble pot and mid pot. 9 volt operation is standard - gain an extra 6db with 18 volts, and another 3.5db with 27 volts. Includes detailed installation instructions. Uses existing volume pots. Made in the USA. Ten year manufacturer's warranty.  FREE SHIPPING!
Bartolini 59CBJD L1/N1
Our Price: $147.00
The 9CBJD L1/S1 is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line humcanceling coil design.
The “Classic Bass”  series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original  J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use  two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
The 9CBJD L1/S1 is the Fender Jazz Bass® ( J Bass® ) replacement pickup set with a ‘long’ for the bridge and a ‘short’ for the neck. The set is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line humcanceling coil design.

The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.

The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.
The 59CBJD-L1 is the Fender Jazz Bass® ( J Bass® ) replacement ‘long’ pickup for the bridge position. It is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a dual in-line humcanceling coil design.
The “Classic Bass” series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more “air” and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics.
The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8″ long which is slightly shorter than the bridge pickup which is 3-3/4″ long. Some modern designs, however, use two ‘long’ bridge-length pickups. In this configuration it is important to use the “LN” (long neck) pickup that is specifically designed to work in this position (do not use a bridge pickup in the neck position). Some (very few) use two ‘short’ neck length pickups. Please check the physical size of the pickups you want to replace to make sure the replacements fit properly.